=
 
 
 

Alfombra de exteriores (LN-400)

This water-resistant outdoor adhesive offers a strong initial grab and a low-odor, non-staining formula. It is ideal for bonding outdoor carpet or most polypropylene-backed artificial turf.

 

Outdoor Carpet Adhesive

Características principales

Recomendado para

Bonding outdoor carpet (polypropylene-, rubber- and urethane-backed) or most polypropylene-backed artificial turf.

NOT Recommended For

Vinyl-backed carpeting

Tamaños disponibles

  • 946 mL
  • 3.78 L

Cobertura

  • 946 mL quart covers 2.5 - 3.3 square metres (27.5 - 37.5 square feet) Using a 3 mm (1/8 in) V-notched trowel.
  • 3.78 L gallon covers 10.0 - 13.3 square metres (110.0 - 150.0 square feet) Using a 3 mm (1/8 in) V-notched trowel.

Utilice

Exterior
 

Obtenga Adobe Reader para ver información sobre ciertos productos adhesivos LIQUID NAILS

Necesita Adobe Reader para ver archivos PDF.
Puede descargarlo aquí gratis si no lo tiene.

Clean-up

Wet product: Soap and water.
Dry product: Scraper and mineral spirit.

Almacenamiento

Between 5°C (40°F) and 35°C (95°F). Keep container hermetically closed when not in use.

Preparación de la superficie

Surfaces should be dry and clean. Floors must be insulated from the ground with a vapour barrier membrane, be structurally sound and even. Grout cracks, holes and joints. Unroll artificial turf to allow it to relax for at least 2 hours prior to installation, in shade if it is to be installed in sun. Concrete: Must be free of any efflorescence and be at least 28 days old. Wood: Must be clean and free of splinters.

Aplicación del producto

Lay carpet in position without adhesive, butting or overlapping edges slightly. Roll carpet back to an area that can be adhered within 15 minutes and apply adhesive using a 3 mm (1/8 in.) V-notched trowel. Allow adhesive to set by waiting 15 minutes and set covering within 30 minutes. Press using a carpet tube or a short piece of lumber. If air bubbles are present, pierce the centre of the bubble to let the vapour escape. Press the carpet back firmly against the adhesive. Note: Always use a trowel so that 80% of the back of the material is covered with adhesive once it is in place.

Working Time

30 minutes. Do not apply on hot surfaces or in blazing sun. Very warm temperatures will decrease working time. Wait 24 hours before walking on the carpet.

Visite estas tiendas minoristas en línea para ver la variedad de adhesivos para la construcción LIQUID NAILS.

El precio y disponibilidad del artículo pueden variar.

 
 
 
;