=
 
 
 

Alfombras en interiores y pisos laminados (LN-200)

This non-staining, low-odor adhesive is specially formulated for indoor carpet and sheet flooring. It features a 40-minute working time, and is resistant to both water and household cleaners to guarantee a lasting bond for indoor projects.

 

Indoor Carpet & Sheet Flooring Adhesive

Características principales

Recomendado para

Installation above or below ground of soft vinyl floor covering or indoor carpet (jute-back, rubber-back, waffle-back, urethane-foam-back)

NOT Recommended For

Wood flooring, vinyl-back, ceramic tiles & outdoor uses


Tamaños disponibles

  • 946 mL
  • 3.78 L

Cobertura

  • 946 mL quart covers 2.1 - 2.5 square metres (22.5 - 27.5 square feet) Using a 3 mm (1/8 in) V-notched trowel on rugged back such as jute backed.
  • 946 mL quart covers 3.8 - 4.0 square metres (40.0 - 45.0 square feet) Using a 2 mm (1/16 in) V-notched trowel on smooth back such as foam backed.
  • 3.78 L gallon covers 8.4 - 10.0 square metres (90.0 - 110.0 square feet) Using a 3 mm (1/8 in) V-notched trowel on rugged back such as jute backed.
  • 3.78 L gallon covers 15.0 - 16.7 square metres (160.0 - 180.0 square feet) Using a 2 mm (1/16 in) V-notched trowel on smooth back such as foam backed.

Utilice

Interior

 

Obtenga Adobe Reader para ver información sobre ciertos productos adhesivos LIQUID NAILS

Necesita Adobe Reader para ver archivos PDF.
Puede descargarlo aquí gratis si no lo tiene.

Clean-up

Wet product: Soap and water as soon as possible.
Dry product: Scraper and mineral spirits.

Almacenamiento

Between 5°C (40°F) and 35°C (95°F) in a dry area. Keep container hermetically closed when not in use.

Preparación de la superficie

Materials, adhesive and room must be maintained at a temperature between 15°C (60°F) and 30°C (85°F) for at least 24 hours before installation and for a few days afterward. Surfaces should be smooth, clean, dry and free from oil, grease, wax or all contaminants. Floors must be insulated from the ground with a vapour barrier membrane, be structurally sound and even. Grout holes and joints.

Aplicación del producto

Apply adhesive with the recommended trowel. Set covering in place and roll with a 68 kg (150 lb.) 3-section roller. Note: Always use a trowel so that 80% of the back of the material is covered with adhesive once it is in place.

Working Time

40 minutes. Very warm temperatures or an improper trowel will affect working time. If a skin forms on the adhesive, scrape the adhesive and reapply. Wait 24 hours before walking on the floor.

Visite estas tiendas minoristas en línea para ver la variedad de adhesivos para la construcción LIQUID NAILS.

El precio y disponibilidad del artículo pueden variar.

 
 
 
;