=
 
 
 

Baldosa de cerámica (LN-321)

This ceramic tile adhesive features a non-slip formula that makes it perfect for bonding floor and wall tiles indoors.

 

Baldosas de cerámica

Características principales

Recomendado para

Bonding ceramic tiles (pavers, quarry tiles, mosaic, slate) on walls & floors

NOT Recommended For

Tiles larger than 20 x 20 cm (8 x 8 in.), asphalt, particle boards or outdoor uses

Tamaños disponibles

  • 946 mL
  • 3.78 L

Cobertura

  • 946 mL quart covers 0.8 - 0.9 square metres (8.8 - 10.0 square feet) Using a 6 mm (1/4 in) square trowel on heavy tiles (20 x 20 cm or 8 x 8 in max.) or rough surfaces.
  • 946 mL quart covers 0.9 - 1.1 square metres (10.0 - 11.3 square feet) Using a 4 x 5 mm (5/32 x 3/16 in) sawtooth trowel on walls.
  • 946 mL quart covers 1.5 - 1.6 square metres (16.3 - 17.5 square feet) Using a 3 mm (1/8 in) sawtooth trowel on floors.
  • 3.78 L gallon covers 3.2 - 3.7 square metres (35.0 - 40.0 square feet) Using a 6 mm (1/4 in) square trowel on heavy tiles (20 x 20 cm or 8 x 8 in max.) or rough surfaces.
  • 3.78 L gallon covers 3.7 - 4.2 square metres (40.0 - 45.0 square feet) Using a 4 x 5 mm (5/32 x 3/16 in) sawtooth trowel on walls.
  • 3.78 L gallon covers 6.0 - 6.5 square metres (65.0 - 70.0 square feet) Using a 3 mm (1/8 in) sawtooth trowel on floors.

Utilice

Interior
 

Obtenga Adobe Reader para ver información sobre ciertos productos adhesivos LIQUID NAILS

Necesita Adobe Reader para ver archivos PDF.
Puede descargarlo aquí gratis si no lo tiene.

Clean-up

Wet product: Soap and water.
Dry product: Scraper and mineral spirits.

Almacenamiento

Between 5°C (40°F) and 35°C (95°F) in a dry area. Keep container hermetically closed when not in use.

Preparación de la superficie

Materials, adhesive and room must be maintained at a temperature between 15°C (60°F) and 30°C (85°F) for at least 24 hours before installation and for a few days afterward. Surfaces should be smooth, clean, dry and free from oil, grease, wax, paint, varnish or all contaminants.

Aplicación del producto

Spread adhesive evenly over the surface using the recommended trowel. Allow 15 minutes for adhesive to set and bond within 45 minutes. Wall: Install the tiles from top to bottom. Firmly press the panel to the adhesive while sliding it slightly. Floor: Set tile and tamp immediately with a padded block. Note: Always use a trowel so that 80% of the back of the material is covered with adhesive once it is in place.

Working Time

45 minutes. Very warm temperatures or an improper trowel will affect working time. Wait 24 hours before grouting or walking on the floor. Wait longer if tile is set on dense or cold floors. Fully cures within 10 days.

Visite estas tiendas minoristas en línea para ver la variedad de adhesivos para la construcción LIQUID NAILS.

El precio y disponibilidad del artículo pueden variar.

 
 
 
;